Festool SYSROCK BR 10 DAB+ Manual De Instrucciones página 15

1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instruc­
tions and safety notices!
Do not dispose of as do­
mestic waste.
Do not tip over!
Do not listen at high vol­
ume levels!
2 Safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Clean only with dry cloth.
7. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other device (including
amplifiers) that produce heat.
8. Protect the cables and switching
adapter from being walked on or
pinched particularly the plugs, con­
venience receptacles, and the point
where the cable exits from the
switching adapter.
9. Only use attachments/accessories
specified by the manufacturer.
10. Use only with stands, tri­
pods, or brackets specified by the
manufacturer, or sold with the de­
vice. When a cable is used, use cau­
tion when moving the cable/device
combination to avoid injury from tip-
over.
11. Unplug the switching adapter and
device during lightning storms or
when the device is not in use for
longer periods of time.
12. Leave all maintenance to qualified
service personnel. Maintenance is
required when the device has been
damaged in any way, such as
switching adapter is damaged, liquid
has been spilled, the device has
been exposed to rain or moisture,
does not operate normally, or fell
down.
13. To Reduce the Risk of Fire or Elec­
tric Shock, Do not Expose This Ap­
pliance To Rain or Moisture.
14. The Shock Hazard Marking and As­
sociated Graphical Symbol is provi­
ded at the bottom of the device if
necessary.
15. The device shall not be exposed to
dripping or splashing. No objects fil­
led with liquids may be placed on
the device.
16. The switching adapter should not be
removed far from the radio, and re­
main easily accessible so that dur­
ing an emergency, the power source
can be easily removed.
17. Where the MAINS plug or an appli­
ance coupler is used as the discon­
nect device, the disconnected device
shall remain readily operable.
English
15