Switch On/Off; Volume Control; Checking Battery Status; Operating Your Radio - Dab - Festool SYSROCK BR 10 DAB+ Manual De Instrucciones

English
consumes power from this battery
pack.
CAUTION always attach the battery
pack completely. If not, it may acciden­
tally fall out of the battery bay, causing
injury to you or someone around you.
CAUTION Do not force attach the bat­
tery pack. If the battery pack does not
slide in smoothly and does not engage,
it is not being inserted correctly.
CAUTION For optimal performance, we
recommend connecting to an 18V Li-Ion
battery pack.
5.3

Switch on/off

► To switch on: Press the power but­
ton [1-6].
The radio is ready for operation.
► To switch off: Press the power but­
ton [1-6].
5.4

Volume control

Press the volume control [a]
and [k] to adjust the desired volume.
For a better sound quality using
an external device, adjust the vol­
ume on the external device to
maximum 70%.
5.5

Checking battery status

To check the current battery level,
press the power button [1-6] to switch
on the radio. The battery status indica­
tor [e] will show the current battery lev­
el (only with Li-Ion battery pack).
Battery is fully charged
Battery is partially charg­
ed
18
Battery low - charging re­
quired
battery critical - alterna­
tive power source re­
quired immediately.
5.6

Operating your radio - DAB

► Straighten up the antenna [1-3].
► Press the Power button [1-6] to
switch on your radio.
► Press the source button [j] until the
DAB mode is selected.
If this is the first time the radio is used,
a quick scan of Band III DAB channels
will be carried out. If the radio has been
used before, the last used station will
be selected.
During the scanning process, as new
stations are detected, the station coun­
ter will increase and stations will be
added to the list. The display shows a
bar graph indicating the progress of the
scan.
When the scanning is completed, the
first station (in numeric-alpha order 0...
9...A...Z) will be selected.
If the station list is still empty after the
scan, your radio will display <No sta­
tions found>.
If no signals are found, it may be neces­
sary to relocate your radio to a position
giving better reception.
Selecting a station - DAB
► Press the Power button [1-6] to
switch on your radio.
► Press the source button [j] until the
DAB mode is selected. The display
will show the name of the radio sta­
tion currently selected.