13.2
Adjustment
MT3 arbor and drill chuck need to be clean.
Plunge the chuck jaws of the drill chuck entirely.
Connect the arbour and drill chuck with care!
Fix it by softly knocking on it with a wooden or rubber hammer (never use a metal hammer).
You can remove the combo with the
morse shank puller.
HOLZMANN MASCHINEN GmbH
MT3
Now insert the combo into the spindle and twist until it
clicks.
Fix it by softly knocking on it with a wooden or rubber
hammer.
www.holzmann-maschinen.at
OPERATION
40
SB 2516H