Getting To Know The Machine; Description Of The Machine And Planned Use; Intended Use; Improper Use - GGP ITALY MH 24 Li Manual De Instrucciones

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a garden tool and
more precisely a battery-powered
portable hedge trimmer device
The machine is essentially composed of
a motor which drives a cutting means.
The operator can operate the machine and
use the main controls, always keeping a
safe distance from the cutting means.

3.1.1 Intended use

This machine was designed
and manufactured for:
• the cutting and trimming of bushes
and hedges consisting of shrubs
with smaller sized branches;
• use by one operator.

3.1.2 Improper use

Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of
improper use may include, but are not limited to:
• cutting grass in general and in
particular close to kerbs;
• shredding of materials for composting;
• pruning;
• using the machine with the cutting means
above the operator's shoulder level;
• use of the machine for cutting
non-plant material;
• using cutting means other than those
found in the "Technical Data" table.
Serious injury and wound hazard.
• using of the machine by more than one person.
IMPORTANT Improper use of the machine
will invalidate the warranty, relieve the
Manufacturer from all liability, and the user
will consequently be liable for all and any
damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "DIY" use only.

3.2 SAFETY SIGNS

The machine has various symbols on it
(fig. 2). They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
WARNING! DANGER! The
failure to use this machine
correctly can be hazardous
for oneself and others.
WARNING! Read the instruction
manual before using the machine.
Use ear protection
devices and goggles.
Use thick non-slip
protective gloves.
Do not leave the machine in the
rain (or in damp conditions)
Danger of cutting yourself!
Keep hands and feet
away from the blades.
DANGER OF PROJECTIONS!
Be careful of possible projections
of material, caused by the cutting
device, which can cause serious
injury to persons or property.
DANGER OF PROJECTIONS!
Dismiss any person or pet at least
15 m during use of the machine.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised assistance centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
2. Sound power level
3. Conformity marking
EN - 4