U I A; Identifi Cation; Rating Plate; I A - CLIMAVENETA MICS-C FF Serie Manual De Instalación-Operación-Servicio

IDENTIFICATION
The MICS / MICS-N chiller can be identifi ed by the:

Rating plate

Giving the technical and performance data of the unit.
If this is lost, ask the After Sales Service for a replace-
ment.

RECEIVING AND HANDLING THE PRODUCT

The MICS / MICS-N chillers are supplied accompanied
by:
• installation, operating and service manual;
• guarantee certifi cate;
• CE declaration;
These are contained in a plastic bag attached to the top
of the chiller.
The unit should always be handled by qualifi ed person-
nel using equipment adequate for the weight of the chil-
ler. If a forklift truck is used, insert the forks under the
base, spacing the forks as wide apart as possible. If a
crane is used, pass the cables through the bottom of the
base, making sure they do not exert pressure on the unit.
Once the packaging has been removed, the appliance
can be lifted and moved by inserting two metal tubes
(max. diameter 1") into the special holes in the base and
using suitable handling equipment.
Dimensione
H
L
P
Gross weight MICS-C
Gross weight MICS-CN
English 06/09
4
POTENZA FRIGORIFERA ------------------------------------ kW
POTENZA TERMICA ------------------------------------------- kW
TIPO REFRIGERANTE ----------------------------------------
CARICA REFRIGERANTE ----------------------------------- Kg
PRESSIONE MASSIMA -------------------------------------- bar
ALIMENTAZIONE ELETTRICA DI POTENZA ---------- V---Hz
ALIMENTAZIONE ELETTRICA AUSILIARI -------------- V---Hz
POTENZA ELETTRICA MAX. ASSORBITA ------------- kW
CORRENTE MAX. ASSORBITA ---------------------------- A
CORRENTE DI SPUNTO ------------------------------------- A
SCHEMA ELETTRICO ---------------------------------------- N°
PESO IN FUNZIONAMENTO ------------------------------- Kg
ANNO DI FABBRICAZIONE ---------------------------------
The installation, operating and service manual
is an integral part of the unit and should therefore
be read and kept carefully.
It is recommended that the packaging should
not be removed until the unit is located in the in-
stallation site.
Do not dispose of packaging materials in the en-
vironment or leave them within reach of children
as they may represent a hazard.
During transport, the chiller should be kept in
a vertical position
L
0072 0092
2000 2000
1040 1040
790 790
350 370
370 390
U
Tampering with or the
removal
ce of rating plates or
other means enabling the unit
to be identifi ed causes pro-
blems during installation and
maintenance.
P
0122
2000 mm
1630
mm
790
mm
470
kg
500
kg
MICS-C / MICS-CN
I A
or absen-
I A