Cleaning The Unit; Reset Button - Kenwood KDC-PS907 Manual De Instrucciones

Safety precautions
NOTE
• If you experience problems during
installation, consult your Kenwood dealer.
• If the unit fails to operate properly, press the
RESET button. When the faceplate is not
visible, press "the touch-sensitive spot" at the
rear of the faceplate (as illustrated on p.12) to
make the faceplate control appear. The unit
returns to factory settings when the RESET
button is pressed. If the unit still fails to
operate properly after the RESET button has
been pressed, contact your local KENWOOD
dealer for assistance.
KDC-PS907 Balanced Output
8V
PREOUT
D.R.I.V.E
NAME S. DISP SCAN RDM REP D.SCN
PS/RT
LOUD
• We recommend the use of the Security Code
function (see p.30) to prevent theft.
6

Cleaning the Unit

If the front panel gets dirty, turn off the
power and wipe the panel with a dry silicon
cloth or soft cloth.
2CAUTION
Do not wipe the panel with a hard cloth or a
cloth dampened by volatile solvents such as
paint thinner and alcohol. They can scratch
the surface of the panel and/or cause the
indicator letters to peel off.
EJECT
CRSC
CD MD 1 2 DISC
CLOSE/
NF
PWR OFF
M.RDM
AUTO AME PTY TI ILLUM
AUD

RESET button

Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.