Getting Started With Serato Itch - Numark V7 Guia De Inicio Rapido

BOX CONTENTS
V7
Platter assembly
o Aluminum platter
o Slipmat
o Vinyl (with 45 RPM adapter attached)
2 stereo audio cables (RCA)
IEC power cable
USB cable
Link cable
Software/driver CD
Spindle screw
Allen wrench
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your V7. Registering your product ensures that we can
keep you up-to-date with any new product developments and provide you with world-class technical support,
should you run into any problems.

GETTING STARTED WITH SERATO ITCH

To get started using your new V7 with Serato ITCH:
1. Visit www.serato.com/itch and download the latest version of Serato ITCH with built-in effects!
2. Assemble V7 (see PLATTER ASSEMBLY below).
3. Double-click the ITCH installer file.
4. Follow the instructions on the screen to begin the installation process. During this process, you will be
prompted to connect the V7 to your computer.
Windows users: throughout the installation:
if Windows warns you that any of the drivers' certificates cannot be verified, approve them
anyway.
if Windows warns you that the hardware installation was not successful or may not work
properly, ignore it.
if you see any dialog boxes flash briefly on the screen before disappearing, ignore them.
These warnings are normal and are simply Windows' reaction to the cancellation of its own hardware
installer. (V7 and Serato ITCH use their own installation processes.)
If you selected the default location during the installation process, you can find the program in the
following location:
XP: Start Menu
Vista: Windows Menu
5. Open the latest version of Serato ITCH!
WARNING!: Do NOT connect two V7s to the same computer via USB!
Programs ITCH
All Programs
1
Serato ITCH