Technical Features - Fermax CITYLINE VDS SMILE Serie Manual De Instalador Y Usuario

SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS
5.- At this time a new confirmation tone will sound indicating the change to entrance hall
lock-release programming mode, then subsequently emitting the aforementioned
beeps detailing the time programmed.
6.- Once the current time indicator tones have concluded, or before they conclude, press
any button on the panel, with one press for each second to be programmed (from 1 to
99 seconds).
To exit programming mode, wait 5 seconds without pressing any key. A 'MUOK' tone will
sound to indicate that you have exited the time programming mode.
If you enter time programming mode and do not press any key, this mode will automatically
be exited after 30 seconds.

TECHNICAL FEATURES

Power supply
Consumption
on standby
video active
IP43
audio and video activated
Operatin temperature
Audio Power in Residence - Entry Panel Direction
Audio Power in Entry Panel Direction - Residence direction
Volume can be Regulated in Both Directions
Basic SMILE VDS Monitor
Wiring
•
Video terminals:
V: live
M: mesh
CT: camera activation (12 Vdc)
V : auxiliary video input (CCTV
AUX
camera connection)
Monitor connector
•
Connection terminals:
+, -: power supply (18 Vdc).
L: data bus.
F1, F2: additional functions. See programming chapter.
T, -: call button connection for residential door (P1)
+A, - : call extension connection ref. 2040, light and bell
activator ref. 2438, etc.
18 Vdc
57 mA
180 mA
390 mA
[-10 , +60 °C]
[14, 140ºF]
1 W
0,15 W
Page 13