Fermax CITYLINE VDS SMILE Serie Manual De Instalador Y Usuario página 68

SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS SMILE VDS
Reset monitor
g) Resetting parameters
The installer may reset some parameters to their default positions.
g1) User information
This function is not available in the basic model.
g2) Default parameters
This re-establishes the monitor with the default configuration, but does not delete the
programmed monitor´s address.
2. When all capacitive buttons have been lit, this option is saved.
g3) Factory configuration
This leaves the monitor with the default configuration, (and even deletes the programmed
monitor´s address).
Page 28
g1
g2
g3
1. Select the default parameters option via
the cursors(white line under the icon) and
press . The monitor exits the menu and
starts to save the selected option. This sta-
tus is displayed, since it sequentially goes
through all capacitive buttons, indicating that
the reset is being performed.
1. Select the default parameters option via
the cursors(white line under the icon) and
press . The monitor exits the menu and
starts to save the selected option. This sta-
tus is displayed, since it sequentially goes
through all capacitive buttons, indicating that
the reset is being performed.