Ordering Accessories; What To Do If You See The Following Symbols On The Display - AEG CG 6200 Instrucciones De Uso

822_949_351 CG6200.book Seite 46 Sonntag, 4. März 2007 11:22 23
g
0 Empty the water tank, fill the tank
with at least 1 liter of water and add
the descaling agent.
1 Note: Make sure descaling agent is
splashed onto surfaces sensitive to acid
such as marble, limestone and
ceramics.
0 Place a container with a minimum
capacity of 1.5 litres under the steam
nozzle (Fig. 9).
0 Turn the knob for steam and hot water
to the position
The descaling program starts and the
descaling solution runs out of the
steam nozzle. The symbols
"P" are steady on.
The descaling programme automati-
cally performs a series of flushes and
pauses to remove limescale deposits
from inside the coffee maker.
After approx. 30 minutes, the water
tank will be empty and the symbols
and are flashing and "P" is steady
on.
0 Turn the knob for steam and hot water
back to the position
The machine is now ready to be rinsed
with fresh water.
0 Remove the water tank and fill it with
fresh water and then replace it in the
appliance.
0 Empty the container under the steam
nozzle and replace it there.
0 Turn the knob for steam and hot water
to the position
A rinsing procedure with fresh water is
carried out and the rinse water runs
out of the steam nozzle. The symbols
, and "P" are steady on.
After a few minutes, the water tank
will be empty and the symbols
are flashing and "P" is steady on.
0 Turn the knob for steam and hot water
back to the position
The symbols as for the last coffee mode
selected are shown, and the symbol
is steady on.
46
0 Empty the container with rinsing
0 Remove water tank, fill it with fresh
3
.
14
, and
15
.
• The water tank is empty or is posi-
0 Fill the water tank, as described in sec-
.
• The tank is dirty or encrusted with
0 Rinse or descale the water tank.
• The appliance cannot make coffee.
and 0 Place a container under the steam noz-
.
water.
water and replace it.
The machine is now ready for use and
its status is as for the last coffee mode
selected.
After running the descaling program,
you are advised to throw away the first
cup of coffee from the machine.

Ordering Accessories

To ensure years of satisfaction with
your coffee machine and prevent
faults arising, it is very important to
descale the coffee machine regularly.
The original descaling agent is obtaina-
ble direct from us.
If you live in Germany, please call our
Order Hotline:
1801 - 20 30 60*
(*Local tariff on Deutsche Telekom's landline network)
Monday to Friday 8.00 am - 6.00 pm
What to do if you see the
following symbols on the
display ...
The symbol is on steady
tioned incorrectly.
tion „Filling with water", page 35, and
insert it fully.
limescale.
The symbols and are flashing
zle and turn the knob for steam and
hot water anticlockwise to the position
(Fig. 9).