Switching the Appliance On / Off
Turn the appliance on and off by using the
NOTE:
• Operation is only possible if the fat tank is used with
the basket in the appliance.
• After the time has elapsed, the appliance will automat-
ically switch into standby mode. The fan keeps running
to cool down the appliance. After approx. 20 seconds,
you will hear 5 beep sounds and the
Before Initial Use
• There is a protective layer on the heating element. To
remove this, operate the appliance for about 10 minutes
without any contents.
NOTE:
Any smoke or smells produced during this procedure
are normal. Please ensure sufficient ventilation.
•
WARNING:
Allow the appliance to cool down before you clean it!
- Disconnect the mains plug from the wall socket.
- Before using the appliance, wipe out the basket, the
fat tank and its interior.
Useful Hints for Use
• This appliance is used for the preparation of solid foods.
Do not prepare any soups or liquid foodstuffs in it.
• A safety switch prevents the use of the appliance without
a basket with the fat tank.
• To achieve an optimum result, fill the frying basket
maximal up to the MAX marking only. Never overfill the
frying basket, so that the food does not touch the heating
element.
• Never put oil or other liquids in the fat tank. In order to
achieve crispy results, you can baste the food with a
little oil.
• Do not prepare the appliance for high-fat foods (e. g.
sausages).
• All foods can be prepared in the appliance, which are
also suitable for the oven.
• Note that the dough expands during baking of cakes,
bread or similar. Nothing must come into contact with the
heating element.
• Foods that are cooked over one another, must be
shaken after half way through the cooking time. Thus the
result is optimized and prevents uneven cooking.
Tip: Remove the basket from the fat tank to be able to
shake the content in a better way.
• Pour water on homemade potato products after cutting
at least 30 minutes to reduce the potato starch. Then dry
the potato pieces with paper.
• The cooking time depends on several factors: Size, con-
dition, quantity of food and set temperature. For standard
values, see "Function Buttons"
PC-FR1177H_IM
• If you do not preheat the hot air fryer, add 3 minutes to
button.
• Fry steaks / larger quantities of meat in a pan previously
• With the appliance, you can also reheat food. Set the
symbol goes off.
• The buttons on the appliance are touch keys. Gently
• By pressing and holding the buttons
Setting the Temperature and Time
Use the
time. Press the °C or Min button to toggle between the dis-
play of the temperature and the time. The display automati-
cally changes after about 5 seconds if no button is pressed.
• The °C button is displayed only when the temperature
• The Min button is displayed only when the time in the
Auto Functions
Press the
functions:
Mode
Preheating P
French fries
Prawns
Meat
Poultry
Fish
Steak
Baked with cheese
Bacon
• These shall be considered as guide values. Depending
• You may, however, change the pre-set temperature
"Auto functions".
the cooking time.
before leaving to cook in the hot air fryer. Time and
temperature are dependent on the desired degree of
doneness.
time to 10 minutes and the temperature to 150 °C.
Function Buttons
NOTE:
touch the buttons with a finger to execute the function.
Whenever a button is pressed, it will be confirmed by
a beep sound.
ward will start.
and
buttons to set the temperature and the
NOTE:
in the display is lit.
display is lit.
button to select from the following auto
Pre-set
temperature in °C
200
200
160
200
180
200
200
170
200
NOTE:
on the size and weight, the time and temperature may
be longer and higher or shorter and lower.
and time of the auto functions. This is not possible
while using the automatic program P!
or , a fast-for-
Pre-set time
in min.
3
22
8
25
20
10
12
3
10
43
12.12.18