Phonic i7300 Manual Del Usuario página 14

Chorus
Editable Property Range
lFo 0.1 to 10
Pre Delay 1 to 200 ms
Depth 0 to 100
Phase 0 to 180°
lPF  hz to 10 khz
balance 0 to 100
Mode typ sine, trg or saw
Phaser
Editable Property Range
lFo 0.1 to 10
Depth 0 to 100
Delay 0.0 to 5.0
Phase 0 to 180°
Fb -100 to 100
Mod typ sine, trg or saw
balance 0 to 100
Pan
Editable Property Range
speed 0.1 to 10 hz
Profundidad 0 a 100
type i <--> D, D-->i, i-->D
Mod typ sine, trg or saw
Delay
Editable Property Range
l Dly 0.00 to 2.55
R Dly 0.00 to 2.55
c Dly 0.00 to 2.55
Fb Dly 0.00 to 2.55
l lvl 0 to 100
R lvl 0 to 100
c lvl 0 to 100
Fb 0 to 100
10
Description
low Frequency oscillator (ie. oscillates low frequencies)
enalbes a delay before the chorus effect is activated
allows users to adjust the depth of modulation
used to adjust the phasing of left and right channels
Determaines the frequency at which a low pass filter will activate
50 being the center, this allows users to adjust the balance of the chorus reverb
Determaines the type of curve used to modulate the chorus reverb
Description
low Frequency oscillator (ie, it oscillates low frequencies)
allows users to adjust the depth of modulation
enables a delay before the Phaser effect is activated
used to adjust the phasing of left and right channels
creates feedback with positive or negative phasing
allows users to select waveform used for low frequency oscillation
50 being the center, this allows users to adjust the balance of the Phaser reverb
Description
allows you to select the pan speed between 0.1 and 10 hz
Determines the depth of the pan modulation
allows you to selecty from the  types of panning
allows users to select waveform used for low frequency oscillation
Description
allows you to choose the delay time of the left channel
allows you to choose the delay time of the right channel
allows you to choose the delay time of a center channel
allows you to choose a feedback delay time
allows you to choose the delay level of the left channel
allows you to choose the delay level of the right channel
allows you to choose the delay level of a center channel
allows you to create feedback at a percentage between 0 and 100
i700