Phonic i7300 Manual Del Usuario página 7

8. Preset / User Key
the Preset / user ke is used to recall one of the 100
factory presets. Pushing this key a second time will allow
you to recall a preset previously stored in a user preset
position (which is indicated by the small user indicator to
the left of the lcD display). after pushing the preset key
to enter either the Factory Preset or user Preset menus,
you are able to user the adjust control to scroll through
the various presets.
9. Type Key
When selecting presets, pressing this key allows you to
select the type of effect program to use: hall, RooM,
Plate, or sPecial. each of these types will have 25
presets to select from.
10. Store Key
The store key is used to save user-modified programs in
one of the 25 user preset slots, as specified by the user.
simply press the store key, chose a preset location, edit
the preset name and press the store key once more to
finalize.
11. Edit Key
Pressing the edit key will allow you to adjust various reverb
properties, to further refine you effect. After pressing th
edit key, a set of parenthesis will appear around the Pre
option on the bottom line of the lcD display. you can
then use the adjust control to scroll to the "Main" and
"Post" options, and press the adjust control to enter these
menus. editing of parameters will be discussed in greater
depth further along in this manual.
i700
12. System Key
Pressing the system key allows you to access the
parameter menus, allowing you to adjust the properties of
various functions, such as Footswitch operation and MiDi
controllability. Pushing the system key will enable you
to scroll through these menus; then pressing the adjust
control will allow you enter the selected menu and adjust
the parameters
.
13. Compare / Bypass key
this key acts as a bypass or compare key, depending
on your current use (as explained later in the manual).
Pushing it will either disable all effects or return you to
your previous effect.
14. Mix / EFX Level Control
this control adjusts the dry/wet mixing ratio between 0
and 100%, as displayed on the bottom line of the lcD
display. Pushing the control allows you to adjust the EFX
level between 0 and 100%.
15. Power Switch
the power switch allows you to turn the ReverbMaster
on and off.