Back Panel - Phonic i7300 Manual Del Usuario

Back Panel

16. Audio Input Connectors
these balanced linput combo connectors (accepting
both XLR and 1/4" TRS jacks) are for the connection of
external devices (such as a mixer or playback feed) to
feed the i700.
17. Audio Output Connectors
These balanced XLR and 1/4" TRS outputs are for
connecting the i700 to external devices (such as a mixe
or multi-track recorder) for output of the analog return
signal.
18. Operating Level (In) -10dB / +4dBu
use this switch to set the input level of the ReverbMaster.
set at -10dbV for use in conjunction with semi-pro
or consumer level devices or at +4dBu for use with
professional audio gear.
19. Operating Level (Out) -10dB / +4dBu
use this switch to set the output level of the ReverbMaster.
set at -10dbV for use in conjunction with semo-pro
or consumer level devices or at +4dBu for use with
professional audio gear.

20. Foot Switch Connector
connecting a footswitch to this 1/" tRs phone jack
allows you to either bypass your current effect, or control
the current preset selection – as specified by the user
– making remote, hands-free control of the ReverbMaster
possible.
21. MIDI Connectors
the ReverbMaster sends and receives MiDi data via
these connectiors. the in connector receives MiDi
signals, where the out connector sends MiDi signals
to MiDi external devices. the thru, on the other hand,
sents the MiDi control data received by the in, to another,
parallel MiDi device for daisy chaning of MiDi devices.
22. AC Power Cable Connector and Fuse Holder
connect ht esupplied ac power cord to this connector and
insert the cord's plug into a wall-socket of suitable voltage.
to replace the i700's fuse, remove the fuse cover, take
the old fuse out and replace with another fuse, ensuring
it is the same as is needed by the device (as indicated on
the furse holder cover).
i700