Phonic i7300 Manual Del Usuario página 15

Tremo
Editable Property Range
speed 0.1 to 10 hz
Depth 0 to 100
Phase 0 to 180°
Mod typ sine, trg or saw
Gate
Editable Property Range
st/link on or off
l thrs -50 to 0
l atck 0 to 200
l Rele 0.01 to 2.55
l hold 0.00 to 2.55
l Range -inF, -50 to 0
R thrs -50 to 0
R atck 0 to 200
R Rele 0.01 to 2.55
R hold 0.00 to 2.55
R Range -inF, -50 to 0
Compressor
Editable Property Range
st/link on or off
l thrs -50 to 0
l atck 0 to 200
l Rele 0.01 to 2.55
l Ratio 1.0 to 10.0, -inF
R thrs -50 to 0
R atck 0 to 200
R Rele 0.01 to 2.55
R Ratio 1.0 to 10.0, -inF
i700
Description
Determines the frequency of modulation
allows users to adjust the depth of modulation
used to adjust the phasing of left and right channels
allows users to select waveform used for low frequecny oscillation
Description
stereo link mode allows you to edit both the left and right gates simultaneously
Determines the threshold of the left gate
allows you to select the attach rate of the left gate
Determines the release rate of the left gate
Allows users to define the time that the gate will remain open
Allows users to define the range of the left gate
Determines the threshold of the right gate
allows you to select the attach rate of the right gate
Determines the release rate of the right gate
Allows user to define the time that the gate will remain open
Allows users to define the range of the right gate
Description
stereo link mode allows you to edit both the left and right gates simultaneously
Determines the threshold of the left compressor
allows you to select the attach rate of the left compressor
Determines the release rate of the left compressor
Allows you to define the ratio of compression that will be applied
Determines the threshold of the right compressor
allows you to select the attack rate of the right compressor
Determines the release rate of the right compressor
Allows you to define the ratio of compression that will be applied
11