Installationinstructions; Important - Sears Kenmore 665.1363 Serie Manual De Uso

INSTALLATIONINSTRUCTIONS
Installer:. Leave Use and Care Guide with the homeowner.
Homeowner:. Keep Use and Care Guide for future reference and
for local electrical inspector's use, if required.
4. Place the other 2 comer posts on the floor to the side of the
compactor, Grasp the sides of the compactor cabinet and put
compactor on its side on top of the corner posts. Remove the
shipping base from the bottom of the compactor,
Excessive Weight Hazard
IMPORTANT: Begin in the room where the compactor will be
located.
1. Remove compactor from shipping carton. Remove all
protective packaging materials such as tape and shipping
pads. Use a mild detergent and warm water to remove waxy
residue caused by protective shipping material. Dry
thoroughly with a soft cloth. For more information, sea
=Cleaning."
2. Check to be sum the power cord is attached to the cord clip
on the rear of the compactor.
-4
A. Cordclip
3. Place the 2 corner posts from the carton on the floor near the
compactor. Press the foot pedal to open the compactor
drawer and remove any shipping materials or other items
from the drawer. Do not remove the compactor beg. Grasp
sides of drawer and lift drawer out of compactor. Place the
drawer on the 2 corner posts.
,4. Levelinglegs
B. Shipping base
L ion Requir m
Product dimensions
341,_ •
(86.7 cm)
15"
(38.1 cm) (61 cm)
i