Dometic TROPICOOL TC 14 Instrucciones De Uso página 12

Operation
6.3 Switch on the cooling box
A
NOTICE!
Take care that there are only objects or goods in the cooling box which
may be cooled or heated to the selected temperature.
➤ Place the cooling box on a stable base.
I
NOTE
The plug is safe against wrong polarity: You can plug it only in one
direction into the (fig. 3, page 4) socket.
➤ Connect the cooling box
– with the connecting cable contained in the scope of delivery to a 220 – 240 V
socket or...
– with the supplied connecting cable to the 12/24 V socket in the vehicle
(fig. 3, page 4).
➤ Press the button "ON/OFF" at the control panel (fig. 2 A, page 4) to switch on
the cooling box.
✓ The cooling box starts to cool or heat the interior space.
Operating display
red (fig. 2 B, page 4)
blue (fig. 2 C, page 4)
6.4 Switch over between cooling and heating
➤ If you want to switch over between cooling and heating, press the button
"HOT/COLD" (fig. 2 D, page 4).
I
NOTE
The control unit of the cooling box has a memory function. It memorises
the selected temperature range for each mode (cooling and heating).
Thus the temperature range which is previously selected in the mode is
set again with each switching on or switching over.
✓ The red or blue operating display lights up and the device starts to cool/heat.
➤ When you want to finish the cooling or heating process, press the button
"ON/OFF" (fig. 2 A, page 4).
➤ When you stop using the cooler, disconnect it from the mains.
12
Operating mode
heating
cooling
TC
EN