Belkin F1UP0001 Manual Del Usuario página 21

P74390ea_F1UP0001_man.qxd
• 128-bit automatically: Selecting this setting will allow you to enter a pass
phrase and the Print Server will determine the keys automatically. (Warning:
Choosing "automatically" will generate new keys that may not function with
an existing network. If your network keys [in your router] are already set,
use "manually" instead.)
WEB Interface – Encryption (64-bit manually)
This menu allows the user to enter keys for 64-bit encryption.
To set encryption for your Print Server:
• WEP Mode: Select encryption mode from the drop-down menu.
• WEP Key: Select the appropriate Key number and enter hex digits into all 20
fields consistent with your existing wireless network settings.
(Warning: Any inconsistencies with your network's settings will cause the
Print Server not to connect to your wireless network).
• Authentication Mode: Default is "open + shared", which operates with all
64-bit networks.
• Apply Changes: Click this button to complete your settings.
NOTE: After changing encryption settings, the Print Server must be restarted
(power-cycled) to reestablish communication with the network.
1/6/04 3:09 PM
WEB CONFIGURATION
17
Page 17