Belkin F1UP0001 Manual Del Usuario página 41

P74390ea_F1UP0001_man.qxd 1/6/04 3:09 PM Page 37
TROUBLESHOOTING
n "Cannot communicate with printer" or "printer not found" error message
appears in Printer Driver Status Monitor
Again, this may result from the printer being powered off or from any of the
issues mentioned above. Check that the printer is online, and make sure that
it is not out of paper or jammed. Some printers "sleep" after periods of
inactivity. In any of these cases, restore the printer to functionality, then, if
necessary, reboot the Print Server.
If those issues are addressed and the problem still exists, Belkin recommends
that the user disable the Printer Driver Status Monitor on the computer. The
status monitor, a convenient checkpoint for the user, usually requires a direct
connection between the computer and the printer. It may not communicate
with the printer when connected to a print server on a network.
k
Instead, use the Windows "Printer Status" window to check printing status.
37