Belkin F1UP0001 Manual Del Usuario página 23

P74390ea_F1UP0001_man.qxd
WEB Interface – Encryption (128-bit manually)
This menu allows the user to enter keys for 128-bit encryption.
To set 128-bit encryption for your Print Server:
• WEP Mode: Select encryption mode from the drop-down menu.
• WEP Key: Enter hex digits into all 13 fields consistent with your existing
wireless network settings. (Warning: Any inconsistencies with your
network's settings will cause the Print Server not to connect to your
existing wireless network).
• Authentication Mode: Default is "open + shared", which operates with all
128-bit networks.
• Apply Changes: Click this button to complete your settings.
NOTE: After changing encryption settings, the Print Server must be restarted
(power-cycled) to reestablish communication with the network.
1/6/04 3:09 PM
WEB CONFIGURATION
19
Page 19