Life Phases; Lifting Column Scope Of Delivery; Transport And Storage - Phoenix Mecano Lambda Colonne Instrucciones De Montaje

7. Life Phases

7.1 Lifting column scope of delivery

The Lambda Colonne lifting column will be delivered as an individual component ready for ope-
ration.
The manual control switch and controller are not part a of the package.
•
After receiving this lifting column, check the device for possible damage and missing com-
ponents.
•
Immediately notify Phoenix Mecano Komponenten AG of any faults found.

7.2 Transport and storage

The product is to be checked by qualified staff for visual and functional damage.
Damage caused by transport and storage must be reported to the responsible person and
Phoenix Mecano Komponenten AG immediately .
It is forbidden to put damaged lifting columns into service.
The following ambient conditions are specified for storing the lifting column:
•
no air containing oil
•
contact with solvent-based paints must be avoided
•
Lowest / highest ambient temperature: -20 °C/+60 °C
•
relative humidity: from 30 % to 75 %
•
air pressure: from 700 hPa to 1060 hPa
•
falling below the dewpoint is not allowed
Divergent environmental factors must be approved by Phoenix Mecano Komponenten AG
44