Liability / Warranty; Liability; Product Monitoring; Assembly Instructions Language - Phoenix Mecano Lambda Colonne Instrucciones De Montaje

3. Liability / Warranty

3.1 Liability

Phoenix Mecano Komponenten AG does not accept any liability for damage or impairments
which occur as a result of changes to the construction of this lifting column by third parties
or changes to its protective equipment.
Only original spare parts may be used when undertaking repair and maintenance.
Phoenix Mecano Komponenten AG does not accept any liability for spare parts that have not
been tested and approved for use by RK Rose+Krieger GmbH.
The EC declaration of incorporation will otherwise become invalid.
Safety-relevant devices must be inspected at regular intervals, but at least once a year, for proper
function, damage and completeness.
We reserve the right to make technical changes to the lifting column and changes to these as-
sembly instructions.
Advertising, public statements or similar announcements may not be used as a basis for the qua-
lity and suitability of the product. Claims to Phoenix Mecano Komponenten AG regarding the
availability of earlier versions or adaptations to the current version of the lifting column will not be
accepted.
When submitting questions, please provide the information on the rating plate.
Our address:
Phoenix Mecano Komponenten AG
Hofwisenstrasse 6
CH-8260 Stein am Rhein
Tel.: +41 (0) 527427500
Fax: +41 (0) 527427590

3.2 Product monitoring

Phoenix Mecano Komponenten AG offers you state of the art products compliant with current
safety standards.
Please inform us immediately if you experience repeated failures or faults.

3.3 Assembly instructions language

The original version of these assembly instructions was produced in the official EU language used
by the manufacturer of this partially completed machine.
Translations into other languages are translations of the original version and the legal provisions
of the Machinery Directive apply to these.

3.4 Copyright

Individual reproductions, e.g., copies and printouts, may only be made for private use. The pro-
duction and distribution of further reproductions is permitted only with the explicit approval of
Phoenix Mecano Komponenten AG. The user is personally responsible for complying with
statutory regulations and may be liable for prosecution in the event of misuse.
The copyright to these assembly instructions is held by Phoenix Mecano Komponenten AG
34