Troubleshooting; Warranty - Dometic ECOLINE CL440LDC Instrucciones De Montaje

CL440, CL460
8

Troubleshooting

Problem
No voltage present.
Voltage is present but
the compressor does not
run (connected to AC
supply).
Poor cooling, compres-
sor running for a long
time /continuously.
Too cold or a great tem-
perature deviation.
9

Warranty

The statutory warranty period applies. If the product is defective, please contact your
retailer or the manufacturer's branch in your country (see the back of the instruction
manual for the addresses).
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
EN
Possible cause
There is an interruption
in the battery –
electronics connection.
Main switch faulty
(if installed).
Additional supply line
fuse has blown
(if installed).
Ambient temperature
too high.
Insufficient ventilation.
Condenser is dirty.
Ambient temperature
too high.
Insufficient ventilation.
Condenser is dirty.
Defective compressor.
Troubleshooting
Suggested remedy
Establish a connection.
Replace the main switch.
Replace the supply line fuse.
Move the cooling device to another
location.
Clean the condenser.
Move the cooling device to another
location.
Clean the condenser.
Replace compressor.
21