K40945 - K40946 - K40955 - K40956
"VIEW Door" app
The app basically consists of four sections:
-
Devices: lists the devices connected to the app
Activity: lists the notifications received
-
-
Album: shows the videos and photos related to the
communications.
Settings: configuration of the main app functions.
-
In detail:
Devices
Each device connected to the app is marked by a name and an
image relating to the last communication.
Note that the Outdoor station - App communication can be inter-
rupted on the monitor display.
Activate the monitor display (if in stand-by) and swipe from left to
right on the screen shown below to interrupt the communication
immediately:
Tap on the image to activate the video consultation mode; the images
relating to the activated device appear on the app.
Generally, in preview mode the app will appear as shown in the
following image:
-
Tap on this icon to access the configuration of the spe-
cific device connected.
A red dot indicates that a more recent version of the monitor
firmware is available.
-
Timeout: Indication of the remaining communication time
-
Play / Stop button: enables/disables the video consultation
mode
-
Video camera: Record video
Photography: Capture image
-
-
Video device selection (the device must be activated in
the "General" section)
-
Image quality for preview mode:
: high quality (20fps);
: medium quality (10fps);
: low quality (0.5fps).
The possibility to reduce the image quality may be useful if there
is limited data communication bandwidth availability.
Video image rotation
-
-
Lock: lock activation (the actuator must be activated in
the "General" section)
Microphone: audio communication activation (when the
-
audio communication is active, the call button LED and the name
card holder LED on the indoor station will flash intermittently).
Activity
A time list is given indicating all the call notifications
Album
Contains the videos and photos recorded during communications
Settings
Used to configure some features of the connected device.
EN
35