Limitations Of Use - Honeywell FENZY X-PRO Instrucciones De Uso

EN
THESE INSTRUCTIONS ARE FOR EXPERIENCED PERSONNEL, TRAINED AND FAMILIAR WITH WEARING BREATHING
APPARATUS
CE regulations apply to full equipment in the CE configurations certified by the notified bodies that have conducted the CE
type examinations.
Failure to comply with this procedure immediately invalidates the CE marking.
To find out all the approved configurations, refer to the configuration tables, available on request.
HONEYWELL RESPIRATORY SAFETY PRODUCTS is continuously endeavouring to improve all its products and the equipment
supplied is subject to change without notice. Consequently, the information, illustrations and descriptions provided in this
document may not be used as a reason to demand the replacement of equipment.
Being in possession of these instructions does not automatically authorise the holder to use breathing apparatus; only
appropriate training will enable safety procedures to be followed.
HONEYWELL RESPIRATORY SAFETY PRODUCTS accepts no liability if the recommendations contained in this document are
not followed.
The recommendations in boxes have the following meanings:
Failure to follow the instructions in boxes could seriously damage the equipment used and put
the user in danger.
Failure to follow the instructions in boxes could lead to incorrect use of the equipment and result
in damage to the equipment.
PROTECTION AND USAGE CATEGORIES
This equipment is designed to protect the user's respiratory tract from toxic gas, dust or aerosols or when the atmosphere is poor in
oxygen (less than 17%).
The FENZY X-PRO is a type 2 apparatus as per EN 137:2006, designed for fire-fighting. Configurations fitted with medium pressure
flexible hoses with inlet or outlet connector comply with Annex A of standard EN 137:2006.

LIMITATIONS OF USE


Limits for the use of all protective respiratory equipment also depend on the facepiece attached to the equipment.

Refer to the instructions for using the facepiece and the applicable official safety requirements relating to the exact circumstances
of use.

Please consult the supplier, if you have any doubt as to whether the respirator is suitable for the work at hand.
This apparatus is not suitable for use by immersion in an enclosed space filled with foam.

The configuration of this apparatus may be different, depending on the usage conditions.
These instructions:

Are exclusively for experienced personnel, trained and familiar with wearing breathing apparatus.

Inform the user of the breathing apparatus of only the standard instructions for wearing the apparatus correctly and not
for maintaining the apparatus.

Inform the user of the breathing apparatus about the routine cleaning frequency that the user is authorised to perform on
the breathing apparatus.

Inform the user of the breathing apparatus about the frequency of routine maintenance that must be carried out by a
specialised maintenance workshop.

These instructions for use are not suitable for carrying out maintenance operations.

For maintenance operations and/or for replacing spare parts, it is essential to contact a specialised maintenance workshop, the
manufacturer or distributor of the breathing apparatus.
INSTRUCTIONS FOR USE
Storage

Store the apparatus away from sunlight and dust as recommended in these instructions.
Pre-use checks

Read all the instructions for using the breathing apparatus and those for the facepiece, and keep both documents.

Make sure that the apparatus is not damaged.
Instructions for the user

Read all appropriate instructions in full and retain them for future use,

Be certified capable of wearing breathing apparatus,

Be experienced, trained and familiar with wearing breathing apparatus.

Undergo regular training appropriate for the actual conditions of use,

Refer to current official safety requirements specific to this particular usage.
Instructions about the apparatus

Verified according to the instructions specified by HONEYWELL RESPIRATORY SAFETY PRODUCTS,

Be accompanied by an inspection form with the date of the previous inspection.
IMPORTANT
IMPORTANT
NOTE
EN - 1