ALFRA KFH 250 Manual De Instrucciones página 18

Accessories and Spare Parts KFH 250
High-performance milling motor (spare motor) 1800 Watt
Milling spindle with double bearing assembly
Stepless speed control from 6,000 to 24,000 rpm
Full-wave control electronics with 12 mm chuck and clamping
nut
Prod.-No. 25192
Protective plate 1 (spare part)
Prod.-No. 25190-026
Motor holder – goggles (spare part)
Prod.-No. 25190-019
Clamping lever (spare part)
Prod.-No. 25190-049
High-strength special steel guide rails (spare part)
W = 70 mm x L = 250 mm
1 set = 2 ea.
Prod.-No. 25132
Original replacement carbon brushes for
High-performance milling motor 1800 W
2 ea. required
Prod.-No. 25192-11
Prod.-No. 25192-11.110
18
230 Volt
110 Volt