Air Filter - Qlima D 610 Instrucciones De Uso

Ocultar thumbs Ver también para D 610:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Mode: Press the mode button
2
clothes mode
Humidity: The requested ambient humidity can be set by touching the humidity
3
button
when pressing the humidity button
shows the selected humidity value; When pressing it for the second time, it's
changing the setting of humidity value.
When the requested ambient humidity e.g. is set to 50% and the unit detects that
the current ambient humidity is higher than 52%RH, the unit starts; when the unit
detects that the current ambient humidity is less than 48%RH, the units stops. For
continuous dehumidifying use the CO setting.
When pressing the humidity button
shows the ambient temperature. After five seconds the digital display
to show the ambient humidity.
4
or 9h. When the timer function is in use the timer sign
5
alarm sounds 10 times and the unit shuts down. After emptying the water tank and
replacing it in the correct position, the unit will continue dehumidifying when the
compressor, automatically, starts after three minutes.
6
during operation, the surface of the evaporator may frost, in order to ensure the
normal operation of the unit it is provided with an automatic defrosting function.
When the unit is defrosting the defrost

AIR FILTER

The dehumidifiers are equipped with a 3-layer filter package to clean the circulated room
air. The 3-layer filter package consists of a screen filter and (separately packed) 3M™ HAF
and active carbon filter. These filters must be placed according to the instructions before
operating the dehumidifiers.
Picture 7
1
Screen filter; to remove bigger dust particles.
2
Active carbon filter sheet; to remove odours.
3
3M™ HAF filter; to remove unhealthy particles from the air such as pollen, bacteria,
animal dander and dust.
4
44
44
. The selected sign will light up.
. (The values can be set to CO~40%~50%~60%.) In dehumidify mode,
Timer: By pressing the timer button
Tank Full: When the water tank is full the tank full sign
Defrost: When the unit is placed in a room with a low ambient temperature
to set the unit in dehumidify mode
for the first time, the digital display
for five seconds, the digital display
the unit is set to run for ~1h~2h~4h···
lights up.
sign lights up.
or dry
returns
lights up; an

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

D 612

Tabla de contenido