Blood Pressure Measurement - visomat comfort II Manual De Instrucciones

C

4. Blood pressure measurement

Once the necessary pressure in the cuff is
reached, the pump stops and the air es-
capes automatically. The falling cuff pres-
sure appears in the display. After a short
time, the symbol „❤" flashes and beep
in time with your pulse. At the end of the
measurement the air escapes automati-
cally from the cuff.
The display unit than shows the measured
value of the blood pressure alternating in
time with the pulse speed.
When a new measurement is started, or
the device is switched off, the values of
systolic and diastolic blood pressure are
automatically stored in the memory of the
instrument.
GB-36
Display unit operation
Please wait 3 minutes before taking a new
measurement.