Wiring Connection - JVC KD-X310BT Manual De Instrucciones

Wiring connection

Signal cord
(not supplied)
JVC Amplifier
Fuse (10 A)
Microphone input
jack ( 13)
Remote wire
(not supplied)
Ignition switch
Car fuse block
Separate
red wire
Make this connection if
your vehicle factory wiring
harness does not have
"12 V ignition switch" wire.
KD-X310BT
Front output
Rear/subwoofer output
Antenna terminal
(For KD-X31MBS) To the optional SiriusXM
Vehicle Tuner (commercially available) ( 11)
Light blue/yellow
STEERING
(For KD-X31MBS)
WHEEL
REMOTE
Join the same color wires together.
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
(Not used) Insulate to prevent short circuit
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
KD-X31MBS
Rear/subwoofer output
To the steering wheel
remote control adapter
Recommended
connection
Blue: To power antenna
Blue/white: To amplifier
Part list for
installation
(A) Faceplate
Vehicle dashboard
(B) Trim plate
Factory wiring
harness (vehicle)
(C) Mounting sleeve
Vehicle-specific Wiring
Harness (separately
(D) Wiring harness
purchased)
For more information:
(E) Extraction key
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
ENGLISH | 27