Wiring Connection; Important; Remote Control (Rm-Rk52) - JVC KD-R680S Manual De Instrucciones

INSTALLATION/CONNECTION

Wiring connection

IMPORTANT

We recommend installing the unit with a commercially available custom
wiring harness specific for your car and leave this job to professionals for
your safety. Consult your car audio dealer.
Vehicle dashboard
Factory wiring
harness (vehicle)
Custom wiring harness
(separately purchased)
Brown (not used)
Recommended
connection
Output terminals
To the steering wheel
remote control adapter
Join the same color wires together.
Blue: To power antenna
Blue/white: To amplifier
Orange/white: Illumination
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker (right)
Gray/black
White: Front speaker (left)
White/black
Purple: Rear speaker (right)
Purple/black
Green: Rear speaker (left) *
Green/black *
KD-R680S KD-R480
Antenna terminal Fuse (10 A)
Light blue/yellow
Blue/white: Remote (200 mA max.)
2
2
Signal cord
(not supplied)
KD-R680S: Expansion port (12 V
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
Ignition switch
Separate red wire
Car fuse block
Make this connection if your vehicle factory wiring harness
does not have "12 V ignition switch" wire.
* 1
Firmly connect the ground wire of the amplifier to the
car's chassis to avoid damaging the unit.
* 2
KD-R480: You can also connect a subwoofer speaker
directly using this lead without an external subwoofer
amplifier. For setting, 16.
1
JVC Amplifier *
500 mA)
Remote wire
(not supplied)
25
ENGLISH