Timer Mode; Cleaning And Care; Emptying The Water Tank - Korona 82002 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 104

TIMER MODE

On hot respectively cold days, the timer mode enables you to arrive home and find a
nice and cooled down room.
AUTOMATIC TURN ON TIME
When in Off (stand-by) mode:
Press the Timer button and the display starts blinking.
use the uP or Down button to select the desired switch on time. The time setting ranges from
1 to 24 hours.
Once the switch on time is set, the display stops blinking.
If needed, press the Timer button again to adjust the switch-on time .
To switch off the timer function, simply press the Power button again.
AUTOMATIC TURN OFF TIME
When in Power On mode:
Press the Timer button and the display starts blinking.
use the uP or Down button to select the desired switch off time. The time setting ranges from
1 to 24 hours.
Once the switch of time is set, the display stops blinking.
Press the Timer button again to change the switch off time if desired.
To switch off the Timer function, simply press the Power button again.
The indicator lights up when timer is set.

CLEANING AND CARE

Clean the air conditioner and filters regularly to maximize performance and efficiency,
and to prolong the appliance's life.
Before cleaning, always switch off the appliance and disconnect it from the mains.
Never immerse the appliance in water. Danger! Electric Shock!
- clean the appliance using a a soft damp cloth.
Never use alcohol, gasoline, and/or any other aggressive cleaning agents/hard objects
that may damage the appliance exterior. Never spray water directly onto the unit.
To remove dust between the vents, use a soft brush or carefully use the vacuum cleaner.

EMPTYING THE WATER TANK

The device has an internal water collection tank. Once, the capacity of the water tank is
reached, the appliance stops operating. The code „E3" will be shown on the LED display.
In order to empty the water tank, turn off the appliance and disconnect it from the mains.
- To drain the water from the appliance, remove the plug from the drainage hole and properly
attach the drainage hose to the drainage hole. Make sure that the end of the hose is placed
into a proper water collection container, e.g. bucket or bigger.
38

Publicidad

Tabla de contenido
loading

Tabla de contenido