Rotor Power Start Up - Rotorbike POWER RPM1 Manual De Usuario

ROTOR POWER START UP

The device has a service LED (red light) viewable on
the external side of ROTOR Power.
At every start-up the LED will blink for some times
(from 1 to 10) depending on the charge of battery.
If LED blinks 10 times battery is FULL 100%.
If LED blinks 3 times battery is EMPTY 10%.
The ROTOR Power becomes inactive and starts a state
of rest after 2 minutes of inactivity.
LED
USER MANUAL - STARTING UP/BATTERY
BATTERY
The ROTOR Power is powered by two lithium standard
batteries: CR2477B.
Estimated riding time: 300-400 hours
The battery must be installed correctly (with positive
"+" side facing outside) and have charge enough
for use. The battery charge can be checked by any
computer or bike device compatible with ANT+
The battery cover should only be removed when
changing batteries. Repeated opening can damage
the internal sealing.
Be careful when threading the battery cover to
prevent any thread damage.
ES
EN
TM
35