Battery Replacement - Rotorbike POWER RPM1 Manual De Usuario

BATTERY REPLACEMENT

No tools are required to replace the batteries. It is
recommended that you change both batteries at the
same time.
Replacement process:
1. Open the cover of the battery cover turning it
counter-clockwise by hand.
2. Extract the old battery from the housing.
Trick:
If you cannot remove the battery easily by hand use a
magnet to take it out.
Do not use any tool or sharp object.
3.
Place a new battery into the housing with the
positive "+" side facing out.
4. Thread the battery cover screwing it clockwise by
hand.
36
USER MANUAL - BATTERY REPLACEMENT
WARNING!
Do not throw the old batteries away
with normal waste, batteries should
be disposed of properly according
to local regulations.
Cover
Battery housing