Rotor Power Training Use - Rotorbike POWER RPM1 Manual De Usuario

ROTOR POWER TRAINING USE

After pairing ROTOR Power follow the configuration
options of your ANT+ TM computer device to select the
measures you would like to display on your device.
Consult your trainer in order to evaluate
which of the measured values provided by
ROtOR power are optimal to maximize your
performance.
ROtOR pOWER MEASUREMENt
ROTOR Power starts measuring automatically after
moving the crank. In normal use, sampling is done
every 2ms (500 times per second) and sent by radio
emissions to your ANT+
TM
ROTOR Power sends the following data to the ANT+
device:
pOWER: Total power output measured in watts for
both legs.
bALANCE: Left - Right leg percentage contribution to
power.
USER MANUAL - ROTOR POWER TRAINING USE
device.
TM
CADENCE: measured in RPM (revolutions per minute).
WARNING!
Disable any ANt+ cadence sensor from your bike,
tM
there is no need for it and it may cause interferences
with the internal ROtOR power cadence sensor.
tORQUE EFFECtIVENESS (LEFt/RIGHt):
Positive power contribution to total power in a
pedaling cycle. Measured as a percentage; 100%
means no negative power.
P+
pEDAL SMOOtHNESS (LEFt/RIGHt):
Ratio between average power and peak power in a
pedaling cycle. Measured as a percentage.
ES
EN
P-
37