AudioSonic CL-1489 Manual De Instrucciones página 3

FRONT VIEW
1. ALARM 1
2. ALARM 2
3. TIME
4. PM INDICATOR
5. SLEEP
6. NAP TIMER
7. MEMORY
8. Weather forecast
TOP VIEW
9. DOWN
10. SET/MEMORY
11. ALARM 1-2
12. NAP/UP
13. VOLUME
14. SNOOZE/DIMMER
1
15. RADIO/SLEEP
2
BACK VIEW
16. BATTERY DOOR
17. DC SOCKET
16
5
6
7
3 4
8
9 13 15 14 11 10 12
17
CARE OF YOUR PRODUCT
• Place your clock radio on a stable surface, away from sources of direct sunlight or
excessive heat or moisture.
• Protect your furniture when placing your units on a natural wood and lacquered
finish by using a cloth or protective material between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger agents such as Benzine, thinner or similar materials can damage the
surface of the unit. Make sure the unit is unplugged before cleaning.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• If the unit is not to be used for a prolonged period, such as a month or longer,
remove the batteries to prevent possible corrosion. Should the battery
compartment become corroded or dirty, clean the compartment thoroughly
and replace the batteries.
INSTALLATION
Plug the AC/DC adaptor to an AC household outlet, and then plug the DC jack to
the back of the unit. Your clock radio is ready to work for you. For power saving
purpose, the LED digits are preset at low brightness, press SNOOZE.DIMMER once
to turn LED digits to high brightness if need.
BACKUP BATTERY INSTALLATION
Your clock radio requires one fresh CR2032 lithium battery (not included) to provide
backup power to the clock in the event of a temporary power interruption.
1. Place your unit face down on a flat surface.
2. Slide and remove the battery cover at the bottom of your unit.
3. Insert one CR2032 lithium battery into the battery compartment with the "+"
side facing up as indicated.
4. Replace the battery cover.
Note this battery is only for backup if the AC power is interrupted. A fresh CR2032
battery could backup your clock continuously for around 3 days.
EN
Instruction Manual
3