Adjusting The Clock - Korona Wanda Instrucciones De Uso

6. Fold to open or close

Adjusting the clock

1. Press "TARE/ON" button and bring the LCD display to read a 0 g (0.0 oz). Reading
2. Press "TIME" button for 4-5 seconds until the LCD display change to time mode and the Hours
flash.
3. Press "UNIT" button to set the Hours up or C° / F° to set the Hours down
4. Press the "TIME" button again to set the Minutes.
5. Press the "TIME" button again to save your setting,
Timer / Count Down Operation
1. While displaying the time, press and hold the "TIME" button for 3 seconds, then release. Once
released the 2 zeros on the left of the timer would flash.
2. Press the "UNIT" to increase the timer and the C°/F° to decrease.
3. Press the "TIME" button again to start the count down.
4. When time is over the buzzer will sound for about 20 seconds. To stop the buzzer any time, press
the "TIME" button.
Weighing procedures
1. Press the "TARE/ON" button to change from clock function to scale and to zero up the scale.
2. Change from g to oz. by pressing the "UNIT" button.
3. Put the food on the glass platform and read the measurement.
4. When some food already weighing on the platform, press the "TARE" button and add another food onto
the platform. The scale will now display the new added weight. Repeat this function if needed.
����
�
�
�
����
�
��
�
7