Note: If a disc is incorrectly inserted - or no disc has been inserted - the symbol
„- -"and the word „NO" appear in the display.
Please note these instructions for playing back CDs and CDRs in MP3
format! The device is not able to play back MP3 fi les. The CD begins to turn,
but the sound cannot be heard.
Note: Playback of CDs produced by the user cannot be guaranteed due to the
large variety of software and CD media available.
PLAY/PAUSE
When a CD is playing
Playback can be briefl y interrupted; the CD track fl ashes in the display. Renewed
pressing of the PLAY/PAUSE button will re-start the playing from the same place.
REPEAT
When a CD is being played the REPEAT button has a repeat function. First start
the CD and then press the REPEAT button.
Press once (REPEAT display fl ashes):
Press twice (REPEAT display lights up):
Press three times:
Programmed Repeat with the PROGRAM Button
This can be used to program any desired sequence of tracks.
1. Press the STOP key.
2. Press the PROGRAM key. „00" appears in the display. Use the F.SKIP/B.SKIP
buttons to select the desired track and then press the PROGRAM button
again.
3. Select the next track with the F.SKIP/B.SKIP key and press the
PROGRAM key again. Repeat the procedure until all the desired tracks are
selected.
4. Press the PLAY/PAUSE key. The playback starts. The selected track numbers
are shown in the display in the correct order. Press this button to pause briefl y
the playback (see PLAY/PAUSE section).
5. Press once the STOP key to stop the playback while retaining the program.
6. In order to play the programme again, fi rst press the PROGRAM button once
and then the PLAY/PAUSE button.
7. In order to delete the programme (in stop mode) fi rst press the PROGRAM
button and then keep the STOP button pressed down for approximately 3
seconds. The total number of tracks is shown in the display.
05-CDK 676 37
The current track is repeated conti-
nuously.
The entire CD is repeated conti-
nuously.
The function is deactivated.
06.05.2005, 8:03:55 Uhr
GB
37