Additional Safety Warnings Specific For Abrasive Cutting-Off Operations - Dexter 20VAG3-125BL.1 Manual De Instrucciones

FR FR
ES ES 2. SAFETY INSTRUCTIONS
PT PT
Safety Warnings Specific for Grinding and Abrasive Cutting Off
Operations:
IT IT
A. Use only wheel types that are recommended for your power tool
and the specific guard designed for the selected wheel. Wheels
EL EL
for which the power tool was not designed cannot be adequately
guarded and are unsafe.
PL PL
B. The grinding surface of centre depressed wheels must be
mounted below the plane of the guard lip. An improperly
RU RU
mounted wheel that projects through the plane of the guard lip cannot
be adequately protected.
KZ UA
C. The guard must be securely attached to the power tool and
positioned for maximum safety, so the least amount of wheel
UA KZ
is exposed towards the operator. The guard helps to protect the
RO RO
operator from broken wheel fragments, accidental contact with wheel
and sparks that could ignite clothing.
BR
BR
D. Wheels must be used only for recommended applications. For
example: do not grind with the side of cut-off wheel. Abrasive
cut-off wheels are intended for peripheral grinding, side forces applied
to these wheels may cause them to shatter.
E. Always use undamaged wheel flanges that are of correct size
and shape for your selected wheel. Proper wheel flanges support
the wheel thus reducing the possibility of wheel breakage. Flanges for
cut-off wheels may be different from grinding wheel flanges.
F. Do not use worn down wheels from larger power tools. Wheel
intended for larger power tool is not suitable for the higher speed of a
smaller tool and may burst.
Additional Safety Warnings Specific for Abrasive Cutting-Off
Operations:
A. Do not "jam" the cut-off wheel or apply excessive pressure. Do
not attempt to make an excessive depth of cut. Overstressing the
288