Technical Data; Preparations At The Workplace; Charging The Battery - Hilti SFC 22­A Manual Del Usuario

4

Technical data

Rated voltage
Weight
Speed in 1st gear
Speed in 2nd gear
Torque (max.)
Torque range (15 settings)
4.1 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.1 Charging the battery

1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.
8 English
Printed: 18.09.2019 | Doc-Nr: PUB / 5293248 / 000 / 03
SFC 22­A
21.6 V
2.4 kg
(5.3 lb)
0 /min ...
600 /min
0 /min ...
1,800 /min
28 Nm
1.5 Nm ...
10 Nm
21.6 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
2153703
*2153703*