OK. OWR 230-B Manual Del Usuario página 12

EN
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
IM_OWR230-B_171019_V05_HR.indb 12
Do not move the product from cold into warm places and vice
versa. Condensation can cause damage to the product and
electrical parts.
Do not use attachments or accessories other than recommended
by the manufacturer or sold with this product. Install in accordance
with this user manual.
When installing the product, leave sufficient space for ventilation
(minimum 10 cm around the product). Do not install in bookcases,
built-in cabinets or the like.
Do not impede ventilation by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc. Do not
insert any objects.
Do not install near any heat sources such as radiators, heat
registers, stoves or other products (including amplifiers) that
produce heat.
Do not shift or move the product when powered on.
Do not touch, push or rub the surface of the product with any
sharp or hard objects.
Danger! To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture.
The product shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on the
product.
Care should be taken so that no objects or liquids enter the
enclosure through openings.
No naked flame sources, such as lighted candles, should be placed
on the product.
Refer all servicing to authorised service agent. Do not attempt
to repair the product yourself. Servicing is required when the
product has been damaged in any way, such as the supply cord
or plug are damaged, liquid has been spilled, objects have fallen
into the product, the enclosure is damaged, the product has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Before connecting the product to a socket outlet, make sure the
voltage indicated on the product corresponds to your local mains.
Only use the provided adaptor.
12
19/10/17 10:40 am