Indication Of Battery Charge Status; Technical Data; Fastening Tool - Hilti BX 3-BT Manual De Instrucciones

Status
The LED shows red.
The LED flashes yellow.
3.5

Indication of battery charge status

When one of the battery release buttons is pressed, the display indicates the battery's state of charge.
Reliable indication of the charge status is not possible while a fastener is being driven or immediately
after a fastener is driven.
Status
All four LEDs show green.
Three LEDs show green.
Two LEDs show green.
One LED shows green.
One LED flashes green.
3.6 Items supplied
BX 3-BT fastening tool, X­FG B3 series fastener guide, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
4

Technical data

4.1

Fastening tool

Weight including battery
Threaded-stud length
Thread diameter
Compression stroke
Contact pressure
Application temperature (ambient temperature)
Application temperature, threaded studs
Recommended maximum driving rate
Rated voltage
*2209577*
Printed: 20.09.2019 | Doc-Nr: PUB / 5514235 / 000 / 00
Meaning
Malfunction; see "Troubleshooting"
Bring the fastening tool to Hilti Service.
Meaning
Charge status is 75 % to 100 %.
Charge status is 50 % to 75 %.
Charge status is 25 % to 50 %.
Charge status is 10 % to 25 %.
Charge status is below 10 %.
B 22/2.6 Li-Ion (02)
B 22/3.0 Li-Ion (01)
B 22/4.0 Li-Ion
B 22/5.2 Li-Ion (01)
B 22/8.0 Li-Ion
2209577
4.0 kg
(8.8 lb)
4.1 kg
(9.0 lb)
4.2 kg
(9.3 lb)
4.3 kg
(9.5 lb)
4.6 kg
(10.1 lb)
31 mm
(1.2 in)
8 mm ... 10 mm
(0.3 in ... 0.4 in)
12 mm
(0.5 in)
50 N ... 70 N
(11 lb ... 16 lb )
f f
−15 ℃ ... 50 ℃
(5 ℉ ... 122 ℉)
−10 ℃ ... 50 ℃
(14 ℉ ... 122 ℉)
650/h
21.6 V
English 7