DJ-Tech uSolo Manual De Instrucciones página 12

BASIC OPERATION
4. EDITING A LOOP
You can edit your seamless loop you obviously must first have created a seamless loop to edit. If
you haven't created a SEAMLESS LOOP, follow the instructions in step 1 to create a loop.
There are three methods as below:
(1) Edit a seamless loop's ending point
You can edit the end point of the loop to make your loop
shorter or longer. Make sure the loop that you want to edit
is not in reloop mode. Turn the JOG WHEEL in search
mode to make the loop shorter/ longer. Press the OUT
button to set the new ending point of your loop.
(3) Reset a loop
You can reset a new loop under the play or pause mode.
Whenever you find a more desired starting point press
the IN button, the LED of OUT button will go out. Find a
new ending point and press the OUT button to set the
ending point of your new loop.
(2) Edit a seamless loop's starting point
You can edit the starting point of the loop to make your
loop shorter. Under the reloop mode, turn the JOG
WHEEL clockwise in search mode to make the loop
shorter. Please make sure the new starting point must
before the ending point. Press the IN button to set the new
starting point of your loop.
11