General Information - Hilti PS 38 Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
PS 38 M ultidetector
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents

1 General information

2 Description
3 Technical data
4 Safety instructions
5 Before use
6 Operation
7 Care and maintenance
8 Troubleshooting
9 Disposal
10 Manufacturer's warranty
11 EC declaration of conformity (original)
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
always refers to the PS 38 Multidetector.
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
Parts and operating controls 1
Display
@
Control panel
;
Battery compartment
=
Marking notches
%
Status LED (red / green)
&
Sensor area
(
Wheel
)
Wrist strap attachment point
+
On/off button
§
Measure button
Page
/
Menu button
13
:
"Left" button
14
·
"Down" button
15
$
"Right" button
16
£
17
Service cover
18 |
Type identification plate
21
¡
22
Display 2
22
23
Signal tone indicator
23
@
Battery status indicator
;
Sensor area indicator
=
Already scanned area
%
Scale showing approximate depth of the object
&
Unscanned area
(
Position of outside edge (for marking a detected
)
object at one of the lateral marking notches)
Scanning mode indicator
+
Gray: detected object is outside the sensor area
§
Black: detected object is inside the sensor area
/
The middle line corresponds with the upper mark-
:
ing notch
Approximate depth of the object
·
Object category or live cable indicator
$
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
en
13