Description - Hilti PS 38 Manual De Instrucciones

Symbols
Read the Return waste
operating material for
instructions recycling.
en
before use.

2 Description

2.1 Use of the product as directed
The PS 38 Multidetector is designed to detect objects such as ferrous metals (rebars), non-ferrous metals (copper and
aluminium), wood beams, plastic pipes, electric cables in dry materials.
Further information and examples of applications can be found at www.hilti.com/detection
The tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used
not as directed.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Take the influences of the surrounding area into account. Do not use the tool or appliance where there is a risk of fire
or explosion.
Modification of the tool is not permissible.
2.2 Displaying object categories
Symbol
Symbol
Symbol
Symbol
Symbol
2.3 Detectable objects
- Steel reinforcing bars
- Metal pipes (e.g. steel, copper, aluminium)
- Plastic pipes (e.g. plastic pipes containing water, e.g. floor or wall heating, etc.)
- Cavities
14
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.:
Ferrous metal
Non-ferrous metal
Plastic / wood
Live electric cable
Unknown object