Items Supplied; Technical Data - Hilti PS 38 Manual De Instrucciones

- Wood beams
- Electric cables (irrespective of whether the cables are live or not)
- Three-phase electric cables (e.g. for electric cookers)
- Low-voltage cables (e.g. for doorbells or telephones)
2.4 Materials suitable for scanning
- Concrete / steel reinforced concrete
- Masonry (brick, cellular concrete, expanded concrete, pumice concrete, sand-lime block)
- Materials beneath surfaces such as plaster, tiles, wallpaper, parquet, carpet
- Wood, plasterboard / gypsum board
2.5 Scanning limitations
Due to the scanning principle employed, certain unfavorable circumstances may negatively affect the result:
- Multiple layers on walls or floors
- Empty plastic pipes in hollow brick, wood beams in cavities and in drywall partitions
- Objects that run through the wall at an angle
- Metal surfaces and damp areas; under certain circumstances, these may be detected as objects in the material
being scanned
- Cavities in the material being scanned; these may be detected as objects
- Proximity to appliances that emit powerful magnetic or electromagnetic fields, e.g. mobile or cordless phone base
stations and generators

2.6 Items supplied

1 The tool
1 Hand strap
4 Batteries
1 Operating instructions
1 Manufacturer's certificate
1 Soft pouch
1 Set of marking pens
1 Hilti toolbox

3 Technical data

Right of technical changes reserved.
NOTE
¹⁾ Depends on scanning mode, the size and type of the object and on the condition and type of material to be scanned
(see fig. 5 on the cover pages).
PS 38
Maximum detection range for locating objects ¹⁾
Location accuracy (to the middle of the object) a ¹⁾
Depth measurement accuracy b ¹⁾
Minimum distance between two objects c ¹⁾
Operating temperature range
Storage temperature range
Batteries
Batteries
Battery life (alkaline batteries)
Battery life (with 2500 mAh batteries)
12 cm (4.7 in)
± 5 mm (± 0.2 in)
± 10 mm (± 0.4 in)
4 cm (1.57 in)
-10...+50°C (14 °F ... 122 °F)
-20...+70°C (-4 °F ... 158 °F)
4 x 1.5 V LR06 (AA)
4 x 1.2 V HR06, KR06 (AA)
5 h
7 h
en
15