Models:
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
SPECIFICATIONS
Model
Rated Impedance [Ω]
Sensitivity [1W, 1m]
Continuous Power Handling [Watts RMS]
Enclosure Depth 1 [in, cm]
Enclosure Depth 2 [in, cm]
Enclosure Height [in, cm]
Enclosure Width [in, cm]
Frequency Response [Hz]
Pro Tip: With a KICKER IQ amplifi er, a pair of KICKER QS speakers, and a few KICKER cables, you're looking at a full system upgrade that will dominate! KICKER
amplifi ers and accessories make it easy to upgrade with your existing or stock source unit. Ask your dealer about KICKER amplifi ers and speaker upgrades to complete
your system!
2015 L7 Enclosure Rev D.indd 2
2015 L7 Enclosure Rev D.indd 2
L7 SUBWOOFER ENCLOSURE OWNER'S MANUAL
DL712 | TL710 | VL712
Note: All specifi cations and performance fi gures are subject to change. Please visit
www.kicker.com for the most current information. To get the best performance from your new
KICKER Subwoofer Enclosure, we recommend using genuine KICKER Accessories and Wiring.
Please allow two weeks of break-in time for the subwoofer to reach optimum performance. The
use of a subsonic fi lter will signifi cantly increase power handling. The power handling specifi cation
in this chart is calculated using a 25Hz, 24dB/octave subsonic fi lter.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and
negative speaker connections on the enclosure. If the bass improves, then the subwoofer was out
of phase in reference to the rest of the audio system.
TL710
2
85.9
750
7-3/8, 19
11, 28
15-1/4, 38.7
21-1/2, 54.6
28–100
VL712
DL712
2
2
86.9
89.9
900
1800
10-1/2, 26.7
12-7/8, 32.7
16-7/8, 43
19-1/4, 49
15-7/8, 40.2
15-7/8, 40.2
20-1/2, 52
33-3/4, 85.7
24–100
20–100
10/17/2014 12:32:25 PM
10/17/2014 12:32:25 PM