ERMILA 4430 Instrucciones De Uso página 9

Moldeador con recubrimiento cerámico
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Description of parts (Fig. 1)
A Cool tip
B Ceramic-coated heating element
C Tongs
D Base stand
E LED
F LCD display
G Temperature setting buttons
H On/off switch
I
Handle
J Mains cable with anti-twist device
Operation
·
Unfold the base stand and place the appliance on a flat,
smooth, non-heat-sensitive surface.
·
Connect to the mains power supply.
·
Hold the on/off switch (H) for 1 second to switch on the
appliance (Fig. 2).
·
Set the desired temperature using the plus and minus
buttons (G) (Fig. 3). The selected temperature is shown
on the LCD display (F).
The appliance has 4 temperature settings:
Setting 1 = Fine:
Setting 2 = Normal:
Setting 3 = Thick:
Setting 4 = Coarse:
·
The red LED flashes whilst the appliance heats up.
·
As soon as the selected temperature setting has been
reached, the red LED remains lit and the appliance will
beep three times. The appliance is now ready to use.
·
After use, switch off the appliance with the on/off switch
(Fig. 2). Hold the on/off switch for 1 second to do this.
The red LED must go out.
Note: The appliance switches off automatically after
it has been operating for 1 hour. The operating time
is shown on the LCD display (Fig. 4). The appliance
beeps six times before switching off.
·
Disconnect from the mains power supply.
·
Allow the appliance to cool down.
CERAMIC coating
Negative ions have an antistatic effect and are gentle to the
hair. They close the scale layer, creating a smooth, silky
hair surface and lock in the natural moisture of the hair,
thereby creating the ultimate shine.
Tips for successful styling
·
Always test the curling tongs on a small section of hair
first.
·
Divide your hair into sections about 2 cm thick and 4
cm wide.
·
Open the tongs (Fig. 4) and place the tips of your sec-
tion of hair onto the heating element.
·
Close the tongs. Hold the curling iron by the handle
and wind hair. Curl the hair as desired without the hot
heating element touching the scalp. Ensure that the hair
is pulled taut.
·
For looser curls, leave the hair wrapped around the
tongs for about 20 seconds.
fine hair
normal hair
thick hair
coarse hair
·
Release the hair by gently rotating the tongs in the
opposite direction.
·
Open the tongs (Fig. 4) and carefully remove them from
your hair.
·
Once all your curls have cooled, you can comb your
hair.
Cleaning and care
·
Before cleaning the appliance, disconnect from the
mains and allow it to cool down.
·
Do not immerse the appliance in water.
·
Use only a soft cloth, which may be dampened slightly,
for wiping the appliance. Do not use solvents or
abrasives!
Disposal
Adhere to the relevant legal requirements when disposing
of the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regu-
lations are specified for the disposal of electrical
appliances, based on EU Waste Electrical and
Electronic Equipment Directive 2012/19/EC
(WEEE). In accordance with this, the appliance
can no longer be disposed of with the local or
domestic waste.
The appliance will be accepted free of charge by
local collection points or recycling centres.
The packaging for this product is made from
recyclable materials. Dispose of this in an environ-
mentally friendly manner by recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9

Publicidad

Tabla de contenido
loading

Tabla de contenido