Radio Data System (Rds); Setting The Alarm Clock - Makita DMR114 Manual De Instrucciones

selected format is then also used when setting the alarms.
1. Press and hold the Menu/Info button to enter the menu
setting.
2. Rotate the Tuning control knob until "CLOCK xxH"
appears on the display and press the Tuning control
knob to enter the setting. You will see the time format
begins to flash.
3. Rotate the Tuning control knob to select either 12 or 24
hour format. Press the Tuning control knob to confirm
your choice of clock format.
Note:
If the 12 hour clock format is chosen, the radio will
then use the 12 hour clock for the setting.
4. Press and hold the Menu/Info button to enter the menu
setting.
5. Rotate the Tuning control knob until a date (e.g. THU
APR 3) appears on the display and press the Tuning
control knob to enter the setting. You will see the date
format begins to flash.
6. Rotate the Tuning control knob to select the desired
date format. Press the Tuning control knob to confirm
your choice.
Setting the clock time and date
1. Press and hold the Menu/Info button.
2. Rotate the Tuning control knob until "CLOCK ADJ"
appears on the display. Press the Tuning control knob
to enter the setting.
3. The hour setting on the display will begin flashing.
Rotate the Tuning control knob to select the desired
hour, and press the Tuning control knob to confirm the
setting. Then rotate the Tuning control knob to select
the desired minute, and press the Tuning control knob
to confirm the setting.
4. Rotate the Tuning control knob until "DATE ADJ"
appears on the display. Press the Tuning control knob
to enter the setting.
5. Rotate the Tuning control knob to select the desired
year and press the Tuning control knob to confirm the
setting. Then rotate the Tuning control knob to select
the desired month, and press the Tuning control knob
to confirm the setting. Then rotate the Tuning control
knob to select the desired day and press the Tuning
control knob to confirm the setting.

Radio Data System (RDS)

When you set the clock time using the RDS function, your
radio will synchronize its clock time whenever it tunes to a
radio station using RDS with CT signals.
1. When tuning to a station transmitting RDS data, the
RDS symbol will be shown on the display. Press and
hold the Menu/Info button.
2. Rotate the Tuning control knob until "RDS CT" and a
clock symbol appear on the display. Press the Tuning
control knob to enter the setting.
3. Rotate the Tuning control knob until "RDS CT" appears
on the display. Press the Tuning control knob to confirm
the setting. The clock time of the radio will set up
automatically according to the RDS data received.
Note:
● The radio clock time will be valid for 5 days each time
the radio time is synchronized with RDS CT.
● To disable the RDS CT function, go back to step 1 to
2 and then rotate the Tuning control knob to select
"MANUAL" option. Press the Tuning control knob to
confirm the setting.

Setting the alarm clock

Your radio has two alarms which can each be set to wake
you to AM/FM radio or buzzer alarm. The alarms may be
set while the unit is in standby mode or while playing.
Note:
Ensure that the time is set correctly before setting the
alarms. If no buttons are pressed for 10 seconds, the
radio will exit the alarm setup.
a. Setting radio alarm time:
1. The radio can be set either when radio is on or off.
2. Press and hold the radio alarm button, the radio alarm
symbol and the display hour will flash along with a beep.
3. During radio alarm symbol flashes, rotate Tuning
control knob to select the hour and press Tuning
control knob again to confirm hour setting. Then rotate
the Tuning control knob to select the minute and press
Tuning control knob to confirm minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Press the Tuning control knob to confirm the setting.
5. During radio alarm symbol is flashing, rotate Tuning
control knob to select desired wake-up band and station,
then press Tuning control knob to confirm the selection.
6. Rotate Tuning control knob to select the desired
volume and press Tuning control knob to confirm the
volume. Radio alarm setting is now completed.
Note:
● If new radio alarm station is not selected, it will select
the last alarm station.
● If the selected AM/FM alarm station is not available
when the alarm is sounding, the buzzer alarm will be
used instead.
b. Setting HWS (Humane Wake System) buzzer alarm:
A beep tone will activate when selecting the HWS buzzer
alarm.
The alarm beep will sound shorter every 15 seconds
10 ENGLISH