Dometic COOLFREEZE CF 11 Instrucciones De Uso página 13

CoolFreeze
For safety reasons, the cooler is equipped with an electronic system to prevent the
polarity being reversed.This protects the cooler against reversed polarity when
connecting to a battery and against short circuiting.
➤ Press the ON/OFF button (1) for three seconds.
✓ The "POWER" LED (2) is lit green.
Once the cooling device has reached the saved temperature, the LED lights up
orange.
✓ The display (5) switches on and shows the current cooling temperature.
✓ The cooler starts cooling the interior.
Setting the temperature (fig. 1, page 3, fig. 2,
6.7
page 3)
➤ Press the "SET" (4) button once.
➤ Use the "+" (6) and "–" (7) buttons to set the cooling temperature.
✓ The set cooling temperature then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
Selecting the temperature unit (fig. 1, page 3,
6.8
fig. 2, page 3)
You can switch the temperature display between Celsius and Fahrenheit. To do this,
proceed as follows:
➤ Switch on the cooler.
➤ Press the "SET" button (4) twice.
➤ Use the "+" (6) or "–" (7) buttons to set the temperature unit °Celsius or
°Fahrenheit.
✓ The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
EN
Operation
13