Soehnle fit connect 200 Instrucciones De Manejo página 28

Sleep mode
The recording of sleep must be started by activating
the sleep mode. The measurement results of sleep
are only displayed in the Soehnle Connect app. In
sleep mode, the device does not count any steps
during movement, but analyzes the movement
data with regard to sleep quality.
Activating the sleep mode
To start the sleep function, first change to the sleep
mode display (5.10) by touching the sensor key.
Now hold the sensor button for approx. 5 seconds.
Sleep mode is activated. You can recognize this by
the fact that the tracker only activates and displays
the display with a moon and the time.
Deactivating the sleep mode
To turn off the sleep mode, touch the sensor button
to activate the display. Now touch the sensor but-
ton again and hold it for approx. 5 seconds. After
releasing, the sleep mode is now deactivated again.
Automatically switches sleep mode on and off:
:
As an alternative to manually operating the sleep
mode, you can also activate automatic activation
and deactivation of the sleep function. In this case,
the Fitness Tracker automatically switches sleep
mode on and off at the selected times. You will
find the automatic sleep function in the Soehnle
GB
: